Last review and update: October 23, 2020.
The technique.
From Saad Rehman, Vivian L. Nelson, 2019 (1):
Blood pressure is remarkably labile. The most insignificant activities can result in substantial changes in blood pressure readings. As such, regardless of whether a manual or automated method is being used to measure blood pressure, medical professionals should always prepare the patient and environment properly before cuff inflation.
First, the patient should be questioned regarding recent caffeine consumption, exercise, or smoking. If any of these activities have occurred within the last 30 minutes, blood pressure measurement should be postponed until this period has passed. Next, the patient should be encouraged to empty his/her bladder. Upon return, the patient should be seated in a quiet room on a chair with back support. Both feet should be flat on the floor with the legs uncrossed, and this seated position should be maintained for at least 5 minutes.
At this time, a properly sized cuff should be placed directly over the patient’s arm, no clothing should be underneath the cuff, and sleeves should not be rolled above the cuff. Once the cuff is in position, the patient’s arm should be supported so that the middle of the cuff is at the level of the right atrium. Initiation of blood pressure measurement can now occur. The patient should not speak or be spoken to while measurements are being taken.
There is significant variation among automated devices, and users should refer to instruction guides on how to initiate cuff inflation and blood pressure measurement. If a manual measurement is being performed, the bell or diaphragm of a stethoscope should be placed over the medial antecubital fossa over the approximate location of the brachial artery. The blood pressure cuff should be inflated 30 mm Hg beyond the point at which the radial pulse is no longer palpable. Deflation of the cuff should occur in a slow and controlled manner – a rate of 2 to 3 mm Hg per second is recommended. As mentioned previously, the appearance of Korotkoff sounds signifies the systolic pressure, while the cessation of these sounds indicates the diastolic pressure.
Possible errors.
From Saad Rehman, Vivian L. Nelson, 2019 (1):
The most common source of error in blood pressure measurement is a failure to adhere to proper technique. Multiple studies have attempted to quantify the impact of common mistakes. Smoking within 30 minutes of measurement can raise the systolic blood pressure up to 20 mm Hg, while a distended bladder can raise both systolic and diastolic measurements by 10 to 15 mm Hg. Sitting in a chair lacking back support can raise systolic blood pressure up to 10 mm Hg, and a similar increase is observed when both legs are crossed. Cuff placement over clothing can affect measurements by an astonishing 50 mm Hg. Talking/listening during measurements can increase both systolic and diastolic measurements by 10 mm Hg. The use of an improperly sized cuff can affect blood pressure in either direction; a larger cuff results in falsely low measurements, while a smaller cuff results in falsely elevated measurements. Similarly, incorrect positioning of the arm also results in a bidirectional error; placing the arm below the level of the right atrium results in higher values, whereas placing the arm above the level of the right atrium generates lower values. The vast ranges of these errors highlight the importance of adhering to appropriate technique when measuring blood pressure
Selected references:
1. Rehman S, Nelson VL. Blood Pressure Measurement. [Updated 2019 Jun 1]. In: StatPearls [Internet]. Treasure Island (FL): StatPearls Publishing; 2019 Jan-.
6 Comments